- Should you wet the ground before pouring concrete?
- Can you lay concrete on soil?
- Should you put Visqueen under concrete?
- What is 6000 psi concrete used for?
- Is it cheaper to pour your own concrete?
- How many bags of concrete do I need for a 10×10 slab?
- Can you pour concrete directly on dirt?
- Should you put plastic under concrete?
- Do you need to compact gravel under concrete?
- What is the best base for concrete?
- How many inches of gravel do you need for a concrete slab?
Should you wet the ground before pouring concrete?
Cover the wet ground with a tarp before you pour to avoid all the water on the ground.
Pouring concrete is a straightforward job.
A wet ground is not the best base for newly poured concrete.
You can do a few things to help the ground dry up just enough for you to pour your concrete..
Can you lay concrete on soil?
Pour concrete over a solid, well-drained base Because concrete slabs “float” on the soil, soft ground or voids underneath may cause unsupported areas to crack under heavy weight like vehicles. Pack about 4 in. of sand or gravel over clay and other poorly draining soils to provide even support.
Should you put Visqueen under concrete?
Recently, though, research has shown that the old traditional layer of 6-mil Visqueen (polyethylene plastic) under the slab is seldom effective for two main reasons: Although it may seem water-tight, this grade of material allows a lot of water vapor to pass through.
What is 6000 psi concrete used for?
For new concrete construction projects, concrete overlays and concrete repairs. Use to construct footings, sidewalks, slabs, steps and patios, setting deck posts, fence posts or poles.
Is it cheaper to pour your own concrete?
One of the least expensive ways to get concrete is to mix your own. You can buy bags of the mix from a home improvement store. Typically, you only have to add water for it to be ready to pour. … Otherwise, you risk getting a weaker concrete once it cures, which could lead to cracks or crumbles within a couple of years.
How many bags of concrete do I need for a 10×10 slab?
For a 10 x 10 slab, you would need 77 60-pound bags or 60 80-pound bags. If we add an extra 10%, that’s an extra 8 60-pound bags or 6 80-pound bags.
Can you pour concrete directly on dirt?
Long story short, yes you can pour concrete over dirt.
Should you put plastic under concrete?
The sand layer cannot dry downwards by vapor diffusion because of the plastic sheet—it is a vapor barrier after all. In fact that’s why we have it under the slab. We want a vapor barrier under the slab. ** We want to prevent water vapor from coming up from the ground into the concrete slab.
Do you need to compact gravel under concrete?
The material still needs to be compacted in order to reduce settling that will occur over time. The top 6 to 12 inches of the backfill under the slab should be filled and compacted with well-graded gravel or crushed material.
What is the best base for concrete?
The base course material, according to ACI 302, “Concrete Floor and Slab Construction,” should be “compactible, easy to trim, granular fill that will remain stable and support construction traffic.” ACI 302 recommends material with 10 to 30% fines (passing the No. 100 sieve) with no clay, silt, or organic materials.
How many inches of gravel do you need for a concrete slab?
Excavate the slab area to a depth of about 7 inches, allowing 3 inches for a gravel base and 4 inches for concrete.